Workshop hardware — fasteners, brass, tools and storageFree shipping over $75All prices in USD
OlympexSupply Co.
Brass Hose Bib — Solid brass, 3/4" outlet, four-arm handle

Brass Hose Bib

Solid brass, 3/4" outlet, four-arm handle

$38.00

USD

Low stock — fewer than ten remaining

1

Standard shipping $8.00, free over $75. Arrives in 3–5 business days. 30-day returns.

A traditional four-arm bib tap in solid brass, with a 3/4" hose thread outlet and a rising-spindle valve with a replaceable washer. The four-arm handle exists because you can turn it with a wet hand, a gloved hand, or two fingers.

The washer is a standard size and can be replaced in about a minute with a spanner and a screwdriver, which is the entire argument for a valve of this design over a sealed cartridge one. A tap that drips is a five-cent part, not a new tap.

The specification

Everything we know about this part, stated plainly — including what it is not rated for. The same record is printed on the card in the box.

Material & finish
Solid CZ121 brass body and handle, unlacquered. Rising spindle with a replaceable fibre washer.
Dimensions
1/2" BSP male inlet, 3/4" male hose thread outlet. 92 mm overall, 62 mm four-arm handle.
Weight
412 g
Finish & tolerance
Bright machined and lightly polished brass, darkening to warm brown outdoors within a few weeks. Faint casting texture on the underside of the body is normal.
Made
Machined and finished in the United States.

Care

  • Replace the washer at the first sign of a drip rather than tightening harder — over-tightening destroys the seat, and a destroyed seat means a new tap.
  • Drain and isolate before the first hard frost. Water left in the body will freeze, expand and split the brass.
  • PTFE tape on the inlet thread, three or four turns clockwise.

Cautions

  • NOT rated or certified for potable drinking water. Garden, workshop and general outdoor use.
  • Not frost-proof. It must be isolated and drained before freezing weather, or it will split.
  • Not for gas, compressed air, or any pressurised system above normal mains water pressure.
  • Does not include a backflow preventer. Where your local code requires one on a hose connection, fit one.

Shipping

$8.00 standard, free over $75. 3–5 business days. Full policy

30 DAYS

Returns

Unused and in original packaging. Refunded within 5 business days of reaching us. Full policy

Questions about this product

help@olympexsupply.comEvery message answered within one business day.

Also in Fittings